How can silicone products prevent stains?

Details during production can determine the quality of the product. Whether the machine is well prepared for production, especially for prominent colors, if the product is too dirty, it will not be recognized by customers. Therefore, clean the stains on the machine and hands in advance during production. After placing the raw materials, cover them with clean adhesive paper to prevent the dust layer from falling off. When placing the raw materials, try to place them quickly and minimize exposure to the air because the adsorption force of silicone is easy to absorb dust. Therefore, many silicone rubber product manufacturers have implemented dust-free production workshops to prevent dirty and messy products.

There are also many problems with the mold. The mold needs to be cleaned with mold cleaning water to ensure that there is no oil pollution before production. However, the mold usually gets dirty during the first few molds during production. When spraying demolding water, a large amount of material from the machine is sprayed into the mold core. Secondly, the mold is relatively rough and has a lot of dirt that is tightly attached to the mold and cannot be cleaned. Therefore, we can seal the ring and manually clean the inside of the mold with caustic soda water or acetone.